|
Before You Start Your Layout...
•Check your software’s manual or call the manufacturer’s technical support if you have questions about using your layout program.
•Adjust your margins to determine where the text will fall on the page.
•Run a test. Cut plain paper to match the size of each enclosure before using the real thing. This allows you to check your spelling and layout to make sure everything is exactly the way you want it before printing the final product. This is the best way to check details, like alignment and letter spacing, and allows you to troubleshoot technical problems.
•The paper we use in our kits will work in most printers but, because printers vary, it’s always a good idea to do a test run before beginning your project.
•As you work on each section, be sure to change the custom page size settings on your computer to match the sizes listed below:
~Announcement size: 4.25“ x 6.25” (lighter, text weight paper)
~Enclosure sizes: 4.5“ x 6.125” and 4.5“ x 6.75” (lighter, text weight paper)
~RSVPCard size: 4.25“ x 5.5” (heavier cardstock weight paper)
•Use your imagination to embellish these pockets to create the perfect stationery for your event at a fraction of custom invitation pricing.
•Visit your local scrapbooking or hobby store to find ribbons, rubber stamps, charms and other items to use in your invitation design to help convey your event theme.
Using Adhesive...
Announcement and Layering Pieces
•Use dry, double-stick tape to layer the coordinating accent layers behind the printed announcement. Adhere pieces to the right-hand side of the invitation, opposite the pocket.
•DO NOT use wet glue. It could damage the paper and cause warping.
•Use 1/4“-1/2”strip of tape in the corners.
|
Envelope Liners
•Align the fold line of the envelope liner with the fold of the flap of the envelope.
•Center the liner side to side in the envelope, leaving approximately 1/8“ border on either side. The top of the liner should fall approximately 1/8“ below the glue strip on the inside of the envelope flap.
•Use dry, double-stick tape to tack down the top of the liner to the envelope flap. One small strip of tape in each corner will be enough to hold it in place. You may put tape in the middle but it’s not necessary.
•Be sure the fold of the liner is aligned correctly with the fold of the envelope flap so your envelope will close smoothly when you are done.
•Let the bottom of the liner float in the body of the envelope.
Before You Start Printing...
•Each printer is different so you will want to check out a few things before starting your project.
•Check your printer manual or call your printer’s tech support line for any set up requirements. Every printer is different and you will want to find out what types of paper your printer can handle.
•It’s always a good idea to test metallic papers and the heavier cardstocks through your printer to find out its capabilities and how it prints.
•Run a quick test to see if you like the way your ink colors look on the paper you have chosen. The same ink color may look different when printed on different paper colors, weights or textures.
•Custom page sizes: Be sure to change the page size settings to match each enclosure size.
•The RSVP postcards, in our kits, are made from heavier cardstock weight paper. Set your printer’s paper type on “heavy weight” to accommodate the thicker paper.
•Feed the paper into your printer on the manual feed tray. This will decrease the chances of a paper jam. Sometimes, sending the file to the printer and, then, feeding the paper, one sheet at a time, works the best. Some printers will allow you to stack the paper in the manual tray so you can print several pieces at a time.
|
IMPORTANT NOTE: for the Pearlized White Recycled Paper Only...
The following tips are for the shimmer paper only. They do not apply to the white matte recycled printable pieces.
•The pearlized white printable pieces work very well with laser printers but DO NOT use this product with an ink jet printer. The paper is too slick. The ink won't dry which will cause smearing.
•Test your printer's settings to find what will work best for you.
• Try using the heavy glossy setting, or your printer’s equivalent, to print the rsvp cards.
• The pearlized white should be printed on one side only. Printing on both sides may cause your printer to jam. Clear labels are recommended for putting the return addresses on rsvp postcards.
• Feeding smaller amounts of paper through your printer, using the manual tray, will usually work better than trying to run a large amount through, all at once.
The tips on this page are designed to help you with the design and printing of your invitations. Because software and printers vary so greatly, we have included basic trouble-shooting hints for you. If you run into bigger printing issues, the best idea is to call the manufacturer’s technical support line for more help. DBCard Studio guarantees the quality of the product we manufacture but is not responsible for equipment problems or malfunctions.
|
Design & Printing Tips 
